Dose Area Product (DAP) and Air Kerma (AK) are measurements commonly used to represent the dose your patient receives during an X-ray procedure. What the terms mean is often not well understood. What actions can be taken to reduce the numbers is important to review.
Consider the analogy of the garden hose spraying water through a window, where the hose is the X-ray tube, the water represents radiation from the X-ray tube, and the window is the collimator. Water only passes through the open part of the window.
What is Dose Area Product?
Dose Area Product (DAP) is an output measurement of the total amount of radiation delivered to the patient. Think of it as the total amount (volume) of water coming through the window. The amount is the same regardless of whether it is measured close to the hose (3) or further away (4). Only the area measured changes (grows broader) further from the hose.
What is Air Kerma?
Air Kerma (AK) is a dose (rate) measurement of radiation at a specific defined position such as a point on the patient’s skin. Think of it as the amount of water from the hose hitting a one square centimeter cup (1cm2). If the cup is close to the hose (5) it will fill quickly (a high AK measurement). If it is farther away (6) it will fill slowly (a low AK measurement).
AK dose meters
Note: A “DAP chamber” is a dose meter but it measures all radiation passing through it rather than sampling 1cm2 Air Kerma is the measurement of the dose the patient’s skin recieves and Dose Area Product is a measurement of all dose exposure.
What do the numbers tell us?
DAP measurement provides a general dose reference and guideline for risk, but does not tell how much dose was received by the patient in a particular spot. AK is very accurate for dose measured at a particular spot (i.e. the reference point – 15cm towards the tube from the isocenter) and in 10 different projections using Philips Zone Dose Reporting, but does not offer a picture of overall radiation dose. DAP and AK compliment each other. DAP and AK readouts taken during the procedure can be used to help minimize radiation. System operation plays an extremely important role. How was dose applied? How was it distributed? You have control.
Radiation exposure readouts with Zone Reporting
During radiation - DoseRate per second or minute
56 mGycm 2/S
Enable dose management across your organization
DoseWise Portal is a vendor-agnostic, web-based solution that collects, measures, analyzes, and reports patient & staff radiation exposure, assisting you to take control of quality of care, efficiency, and patient/staff safety.