Automated external defibrillators

HeartStart OnSite/HS1

AED

Product number:

M5066A

The Philips OnSite/HS1 is designed for the ordinary person in the extraordinary moment. It is easy to set-up and includes automatic Life Guidance features like voice prompts and CPR coaching to help guide you through the treatment of sudden cardiac arrest.

פרטי קשר

* שדה זה הנו חובה
*

פרטי קשר

*
*
*

פרטי החברה

*
*
*
*
*

פרטי עסק

על ידי ציון הסיבה שלך ליצירת קשר נוכל לספק לך שירות טוב יותר.
*
*
Features
Step-by-step guidance so you know exa... || KBA 1

Step-by-step guidance so you know exactly what to do

OnSite has a clean and simple interface that’s easy to use and understand. Its voice instructions guide you through the entire process, from placing the pads, to delivering a shock, to performing CPR. You won’t get lost because the intelligent sensors can detect what step you’re on and adjust to your level of expertise.
Ready to use when you need it || KBA 1

Ready to use when you need it

Setting up the OnSite is easy and quick. The pads and battery are already installed. Just pull the green tab to launch the initial self-test. After that, the OnSite performs daily self-tests so you can trust that it is ready-to-go if needed.
Instructions that adapt to your pace || KBA 1

Instructions that adapt to your pace

When you place the SMART pads on the victim’s bare skin, they adapt the defibrillator’s instructions to your actions. They follow your pace so they don’t overwhelm, run ahead, or slow you down. If needed, the prompts are repeated or rephrased, sometimes even including additional instructions to help you understand.
Fast shocks to improve treatment succ... || KBA 1

Fast shocks to improve treatment success

Since minimizing the time to shock after the last CPR compression may improve survival, shock delivery time is critical. The Onsite is among the fastest in class at delivering shock treatment after CPR*.
Personalized therapy for each patient || KBA 1

Personalized therapy for each patient

Before you can deliver a shock, the OnSite automatically checks to make sure a shock is necessary and that the right therapy is given. If you install the infant/child SMART Pads, the defibrillator will automatically adjust to a lower energy level and modify the coaching instructions to provide infant/child CPR.
Easy to train your team || KBA 1

Easy to train your team

The OnSite easily converts to a training unit when you attach training pads—no need to purchase separate equipment to practice rescue scenarios with your team. These special pads prevent the defibrillator from delivering a shock and activate its training mode which includes eight different emergency scenarios.

Specifications

Battery
Battery
Type
  • 9 volt DC, 4.2 Ah, composed of disposable long-life lithium manganese dioxide primary cells
Capacity
  • Minimum 200 shocks or 4 hours of operating time (EN60601-2-4:2003)
Install-by Date
  • Battery is labeled with an install-by date of at least five years from date of manufacture
Standby Life
  • Four years typical when battery is installed by the install-by date. (Will power the AED in standby state within the specified Standby Temperature range, assuming one battery insertion test and no defibrillation uses)
Product Specifications
Product Specifications
Kit Contents
  • Defibrillator, battery (one, pre-installed), SMART Pads (one set, pre-installed), set-up/maintenance guide with expiration date tags, owner's manual, quick reference guide
Waveform
  • SMART Truncated exponential biphasic. Waveform parameters adjusted as a function of patient impedance
Defibrillation peak current - Adult
  • 32 A (150 J nominal) into a 50 ohm load
Defibrillation peak current - Pediatric
  • 19 A (50 J nominal) into a 50 ohm load (using optional infant/child SMART Pads Cartridge)
Quick Shock
  • Able to deliver a shock after the end of a CPR interval, typically in eight seconds
Shock-to-Shock Cycle Time
  • Typically less than 20 seconds between shocks in a series
Voice Instructions
  • Detailed voice messages guide responder through use of the defibrillator
CPR Coaching
  • Instructions for adult and infant/child CPR available at user selection
Shock Delivery
  • Via adhesive pads placed on patient's bare skin as illustrated on pads
Controls
  • Green SMART Pads cartridge handle, green On/Off button, blue i-button, orange Shock button
Indicators
  • Ready light, blue i-button, caution light
Environmental/Physical Requirements
Environmental/Physical Requirements
Sealing
  • Solid objects per EN60529 class IP2X; Drip-proof per EN60529 class IPX1
Operating Temperature
  • 0 - 50 °C (32 - 122 °F)
Standby Temperature
  • 0 - 43 °C (32 - 109 °F)
Operating Humidity
  • 0 to 95 % relative humidity (non-condensing)
Standby Humidity
  • 0 to 75 % relative humidity (non-condensing)
Operating Altitude
  • 0 to 4,500 m (0 to 15,000 ft)
Standby Altitude
  • <gt/> 48 hours from 0 to 8,500 ft and <lt/>48 hours from 8,500 to 15,000 ft
Shock/Drop Abuse Tolerance
  • Withstands 1 meter drop to any edge, corner, or surface
Vibration
  • Meets EN1789 random and swept sine, road ambulance specification in operating and standby states
EMI (Radiated/Immunity)
  • Meets EN55011 Group 1 Level B Class B and EN61000-4-3
SMART Pads
SMART Pads
Energy delivered
  • Adult: nominal 150 joules into a 50 ohm load; Infant/Child: nominal 50 joules into a 50 ohm load
How Supplied
  • Disposable cartridge, containing adhesive defibrillation pads, clicks into defibrillator for an integrated pads solution
Active Surface Area
  • 85 cm² (13.2 in²) each
Cable Length
  • Adult pads: 137 cm (54"); Infant/Child pads: 102 cm (40")
Use-by Date
  • Cartridge is labeled with a use-by date of at least two years from date of manufacture
Training pads (optional)
  • Special pads put HeartStart OnSite into training mode and disable its energy delivery capability. Training pads feature 8 real-world training scripts. Use with training mat (included) or with adapters on manikins
Automated and User-activated Self-tests
Automated and User-activated Self-tests
Daily Automatic Self-tests
  • Tests internal circuitry, waveform delivery system, pads cartridge, and battery capacity
Pads Integrity Test
  • Specifically tests readiness-for-use of pads (gel moisture)
Battery Insertion Test
  • Upon battery insertion, extensive automatic self-tests and user-interactive tests check device readiness
Status Indicator
  • Blinking green "Ready" light indicates ready for use. Audible "chirp" indicates need for maintenance
Data Recording and Transmission
Data Recording and Transmission
Infrared
  • Wireless transmission of event data to a PC or Palm PDA, using the IrDA protocol
Data Stored
  • First 15 minutes of ECG and the entire incident's events and analysis decisions